Hybrid Heart Happy Face

| /

This is available in one size. This is printed to order so please allow up to 5 business days for your product to be made, packed and shipped.


 

Sizing Details- 

Please note these are small size! Sometimes photos seem quite large. (Please see included photo of hand size for general reference)

 

Mould - 60mm tall x 70mm at widest side measurement x 28mm deep

Finished Bomb - 57mm tall x 68mm widest side measurement x 22mm deep

The weight of your bath bomb will vary depending on your recipe. With mine, this made about a 70g bath bomb. 

 

This is made from PLA+ Material. It is printed on a 3d printer and as such has speciality care conditions (please see below).  

 

Stipulations and care-

Please be aware this is not a food-safe product and should not be used for food preparation.

This mould is to be hand-washed only and is NOT dishwasher safe. Please only wash with cold water. Towel Dry after washing in cold water. Please do not soak moulds in water as they can retain water which will activate your bombs. Also, soaking moulds will cause the bond between the layers to weaken and your mould will become fragile over time.

The temperature will affect this mould and warp it in a way that cannot be fixed. Microwaves, garages (or other non-temperature controlled spaces like cars) and direct sunlight are all best avoided with this mould.

You may need to add a mould release product (Cyclomethicone, isopropyl (rubbing) alcohol, etc) to the mould to help cleanly remove your mixture.

Please note with any printed product they are subject to minor surface defects, minor colour and tiny dimensional deviation etc. This will not affect the performance of the piece and as close to 100% is always the goal.


    Or 6 weekly interest free payments from $1.16 with what's this?